Looking for a fountain that truly stands out? The Jet Stream Fountain creates a powerful, narrow plume that shoots straight up — reaching heights of up to 50 feet in the 1½-hp model. Its sleek, vertical display forms a striking centerpiece for any pond or lake, delivering both visual impact and a soothing sound. For added appeal after dark, optional lighting can elevate the effect even further.
Beyond its beauty, the Jet Stream Fountain also supports a cleaner, healthier body of water. By boosting circulation and increasing oxygen levels, it aids in breaking down organic debris naturally. The continuous surface movement also helps discourage mosquitoes from settling and reproducing.
Made in the USA: All Scott Aerator Company fountains, aerators, Aquasweeps, and de-icers are proudly made in Holland, Michigan and carry an unconditional 5-year motor warranty. These products are manufactured using a stainless-steel, oil-free, submersible motor, making them among the most environmentally friendly pond products on the market. There is no oil to change, no maintenance required, and no control box needed. Like all Scott Aerator fountains and aerators, the Jet Stream Fountain is designed for use in both fresh and salt water.
115 V: 70 feet in length, 10-gauge, submersible, with plug
230 V: 70 feet in length, 12-gauge, submersible
Electric power cord can be ordered in greater lengths
Approved for salt water
Light kits can be added at purchase or later
Two 20-pound weights or concrete blocks required for anchoring (not included)
Two nylon ropes required for anchoring (not included)
Designed for 24-hour-per-day operation
No maintenance required
36-inch minimum pond depth required
Spray pattern measures: 25' high
Jet Stream Fountain 1 hp
1-hp, 115 or 230 V, oil-free motor
60 Hz, single-phase, 3,450 rpm (0.75 kW)
Current draw:
115 V: 11.5 amps
230 V: 8.2 amps
Also available in 3-phase and/or 50 Hz versions
75 gallons-per-minute flow rate
5-year motor warranty
Easy installation
Electric power cord provided:
115 V: 100 feet in length, 10-gauge, submersible, with plug
230 V: 100 feet in length, 12-gauge, submersible
Electric power cord can be ordered in greater lengths
Approved for salt water
Light kits can be added at purchase or later
Two 35-pound weights or concrete blocks required for anchoring (not included)
Two nylon ropes required for anchoring (not included)
Designed for 24-hour-per-day operation
No maintenance required
44-inch minimum pond depth required
Spray pattern measures: 30' high
Jet Stream Fountain 1½ hp
1½-hp, 230 V, oil-free motor
60 Hz, single-phase, 3,450 rpm (1.1 kW)
Current draw:
230 V: 10.6 amps
Also available in 3-phase and/or 50 Hz versions
90 gallons-per-minute flow rate
5-year motor warranty
Easy installation
Electric power cord provided:
230 V: 100 feet in length, 12-gauge, submersible
Electric power cord can be ordered in greater lengths
Approved for salt water
Light kits can be added at purchase or later
Two 45-pound weights or concrete blocks required for anchoring (not included)
Two nylon ropes required for anchoring (not included)
Designed for 24-hour-per-day operation
No maintenance required
50-inch minimum pond depth required
Spray pattern measures: 50' high
Safety & Compliance: A GFCI (Ground Fault Circuit Interrupter) is required. Always disconnect power when swimmers are present. Each Jet Stream Fountain is ARL-tested and fully compliant with UL standards and the National Electric Code when installed as a complete package.
Pond Fountain Comparison Brochure (PDF)
