The Gusher creates an eye-popping vertical column of water in a dense, cascading, wind-resistant pattern. The stream from the ¾, 1, and 1½ hp models reaches heights between 18 and 30 feet, creating a powerful visual water feature.
The Gusher promotes a healthy aquatic environment and helps facilitate the natural breakdown of decaying vegetation. Its rapid water movement also inhibits mosquito breeding and helps keep the water sparkling clean.
For those looking to extend the allure into the evening, the Gusher Fountain is also available with lighting, creating a magical ambiance that transforms your water feature into a captivating nighttime spectacle.
Made in the USA: All Scott Aerator Company fountains, aerators, Aquasweeps, and de-icers are proudly made in Holland, Michigan and carry an unconditional 5-year motor warranty. These products are manufactured using a stainless-steel, oil-free, submersible motor, making them among the most environmentally friendly pond products on the market. There is no oil to change, no maintenance required, and no control box needed. Like all Scott Aerator fountains and aerators, the Gusher Fountain is designed for use in both fresh and salt water.
115 V: 70 feet in length, 10-gauge, submersible, with plug
230 V: 70 feet in length, 12-gauge, submersible
Electric power cord can be ordered in greater lengths
Approved for salt water
Light kits can be added at purchase or later
Two 20-pound weights or concrete blocks required for anchoring (not included)
Two nylon ropes required for anchoring (not included)
Designed for 24-hour-per-day operation
No maintenance required
36-inch minimum pond depth required
Spray pattern measures: 18' high
Gusher Fountain 1 hp
1-hp, 115 or 230 V, oil-free motor
60 Hz, single-phase, 3,450 rpm (0.75 kW)
Current draw:
115 V: 11.5 amps
230 V: 8.2 amps
Also available in 3-phase and/or 50 Hz versions
70 gallons-per-minute flow rate
5-year motor warranty
Easy installation
Electric power cord provided:
115 V: 100 feet in length, 10-gauge, submersible, with plug
230 V: 100 feet in length, 12-gauge, submersible
Electric power cord can be ordered in greater lengths
Approved for salt water
Light kits can be added at purchase or later
Two 35-pound weights or concrete blocks required for anchoring (not included)
Two nylon ropes required for anchoring (not included)
Designed for 24-hour-per-day operation
No maintenance required
44-inch minimum pond depth required
Spray pattern measures: 23' high
Gusher Fountain 1½ hp
1½-hp, 230 V, oil-free motor
60 Hz, single-phase, 3,450 rpm (1.1 kW)
Current draw:
230 V: 10.6 amps
Also available in 3-phase and/or 50 Hz versions
90 gallons-per-minute flow rate
5-year motor warranty
Easy installation
Electric power cord provided:
230 V: 100 feet in length, 12-gauge, submersible
Electric power cord can be ordered in greater lengths
Approved for salt water
Light kits can be added at purchase or later
Two 45-pound weights or concrete blocks required for anchoring (not included)
Two nylon ropes required for anchoring (not included)
Designed for 24-hour-per-day operation
No maintenance required
50-inch minimum pond depth required
Spray pattern measures: 30' high
Safety & Compliance: A GFCI (Ground Fault Circuit Interrupter) is required. Always disconnect power when swimmers are present. Each Gusher Fountain is ARL-tested and fully compliant with UL standards and the National Electric Code when installed as a complete package.
Pond Fountain Comparison Brochure (PDF)
